KD-TS furnace pre-furnace silicon carbon analyzer

Key features:

It adopts anti-electromagnetic interference, dust insulation and portable design, which is easy to operate. The improved evaluation method can automatically measure important metallurgical parameters, making up for the shortcomings of the "spectrum" that cannot accurately measure non-metallic elements (C, Si) and the time requirements of conventional analytical instruments that cannot meet the pre-furnace analysis.

Main parameters of KD-TS furnace pre-furnace carbon silicon analyzer:

1. Measurement function: thermal analysis of white iron, gray cast iron and ductile iron.

2. Measurement parameters: determination of molten iron CEL, C, Si, TL, TS, △T, △TM

Determine the tensile strength Rm and hardness HB

3. Temperature measurement range: 1250°C~1350°C

4. Measuring range: C: 2.1~4.2% Si: 0~5.0% CEL: 2.5~5.0%

5. Accuracy: ≤±1°C CEL±0.047% C±0.05% Si±0.1%

6. Display: 4-digit LED display word height 50mm resolution: 1 °C

7. Operation mode: 9 buttons to select the required parameters, in which "Auto" displays CEL, C, SI, adjust the si content by rotating the potentiometer, and adjust the C content through the potentiometer.

8. Output mode: serial signal RS232-TTY current loop signal output.

9. Working parameters: power supply AC 220V, 50Hz; The power is 30W, and the ambient temperature is 0~50°C

10. Temperature compensation range: 0~15°C

11. Matching sample cup type: K type

12. Display temperature unit: Fahrenheit or Celsius can be set

13. Measurement time: 240 seconds (generally 1 minute 45 seconds)

14. Measurement status display: "Ready" green light, "Measure" yellow light, "Complete" red light display on the instrument

15. Instrument protection standard: IP65 standard protection

16. EMC standard: implement EN50081-2 and EN50082-2 standards