KD-TS600 furnace liquid iron quality management instrument adopts original components, high measurement accuracy, stable use and long service life. It can measure the content of conventional carbon and silicon, and can also test the nodularity and tensile strength. The built-in casting function database is suitable for the control of the pre-furnace elements in the production of cast iron and ductile iron, and can measure the content of carbon and silicon elements and carbon equivalent (the detection time is about 1 minute and 30 seconds), and adjust the ingredients in time according to the measurement results. It reduces the time of molten iron in the furnace and reduces the workload of the furnace worker. Reduce inspection costs and time.

Main performance of KD-TS600 furnace liquid iron quality management instrument:

1. Instrument specifications:

(1) Original temperature transmitter, industrial control motherboard, 21-inch LED true color display

(2) Power supply: AC 220V 50Hz Power: 100W Chassis size: 570×400×1350mm

2. Measurement function:

(1) Molten iron grade, carbon equivalent, carbon content, silicon content, subcooling, nodularity, tensile strength, etc

(2) The setting of the target material and the weight of the molten iron

(3) Automatically calculate the amount of carburizer, ferrosilicon and scrap steel

(4) Automatically draw the detection line of carbon, silicon, carbon equivalent, initial crystal temperature, eutectic temperature and supercooling

(5) Preservation and reproduction of data

3. Setting function: 10 inspection lines, 10 target components, and linkage between the inspection line and the target material can be set

4. Supplementation function: calculate the supplemental amount according to the measurement results against the target component, molten iron weight and yield

5. Recording function: according to the measurement time order, 10,000 measurement results can be recorded, and the process can be reproduced

6. Browsing function: you can browse the trend distribution chart of the main measurement parameters for data analysis

7. Output function: the measurement record can be transferred to other computers through the U disk for reference

Main parameters of KD-TS600 furnace molten iron quality management instrument:

Measurement Name: Measurement Range: Measurement Accuracy
  Temp          0 - 1370℃              F.S±0.01%
  CE％          2.20％－5.00％            ±0.05％
  C％        2.00％－4.80％                ±0.05％
  Si％          0.20％－5.50％                ±0.10％
  SG％          62％－95％              ±10.0％
  RM            HTl00－HT350