KDW660 melting thermometer

The wireless transmission of KDW660 melting thermometer is to synchronize and accurately transmit the temperature value measured by the portable thermometer to the wall-mounted large-screen display through wireless transmission, eliminating the fetters of the connection of the wall-mounted large-screen thermometer. The instrument adopts measurement sensor devices and adopts a variety of treatments to make the instrument work stably for a long time. The instrument is matched with a suitable thermocouple for precise temperature measurement in a variety of melting occasions.  

Thermocouple Type Measuring range (°C) Applicable occasions

Monoplatinum rhodium KS-602 0~1750 steel, iron, copper liquid

Monoplatinum rhodium KR-602 0~1750 steel, iron, copper liquid

Double platinum rhodium KB-602 500~1800 high temperature molten steel

Tungsten-rhenium KW-602 0~2000 steel, molten iron

Ni-chromium-Ni-Silica K 0~1000 Aluminum, zinc liquid

This instrument has:

1. The temperature value is automatically maintained when the temperature is measured.

2. The light and buzzer synchronously prompt the end of temperature measurement (lift the test gun) function.

3. Alarm functions such as broken couple, outgoing range, power supply undervoltage, etc.

4. The power supply uses nickel-metal hydride rechargeable battery (the temperature can be measured thousands of times after charging)

5. Turn on the power supply, when there is no signal input for 2 minutes, automatically disconnect the power function.

This instrument can be equipped with 5 kinds of thermocouples at the same time.

The common problems and solutions of melting thermometers are as follows:

1. Inaccurate readings: It may be that the sensor is damaged or improperly calibrated, and the sensor needs to be replaced or recalibrated.

2. Display failure: It may be that the battery is dead or the display is damaged, and the battery needs to be replaced or the display screen needs to be repaired.

3. Unable to connect to a computer or other device: It may be a problem with the connection line or software settings, and you need to check the connection line or reset the software.

4. The thermometer cannot be turned on after being unused for a long time: it may be that the battery is aging or the battery liquid is leaking, and the battery needs to be replaced and the inside cleaned.

5. Complicated operation or wrong operation: You need to read the manual carefully and follow the correct steps.

The above are some common problems and solutions, but the specific situation needs to be judged and dealt with according to the actual situation.